Detailed Product Description

Installation notice for SAS807FHL-0 series thermostat:
1. Vertically fix the thermostat to wall, approx. 1.5 meter from the ground, in order to ensure receiving adequate air flow and accurately controlling room temperature.
2. Put the thermostat away from doors or windows which have direct sunlight and keep it away from any cooking appliance or other heat sources.
3. Remove the cover by pushing fastener connecting the base and the cover. (Note: must not take down the temperature-regulating knob).
4. Thread the connection wire through the square hole in the base and connect the wire to integrated terminal according to the wiring diagram on the cover.
5. Use the screws supplied fix the base in the junction box.
6. Put the cover back to the base and fix them together.
7. The power switch is at the bottom of the thermostat, and the regulating knob just has the function of temperature regulating.
8. For customers' choice, we also furnish with many other models of thermostats without power switch.

Technical data:
Temp. control scope: 10°C~30°C
Operating temp. difference: <1.5°C at 20°C
Sensor: gas-filled bellows
Crust material: flame-retarded and modified engineering plastics
Electric parameter: 10A/16A 250V max. 50/60Hz
Insulation resistance: above 100M&Ogega; meter at DC 500V
Electrical strength: for 1 min. no breakdown at AC 1,500
Service life: more than 100,000 times
Wire connection: terminal holds wire of max. 2.5mm², unistrand wire of 2 mm²is recommended